Progressive Scientifics

Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand contact time ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL AE215 - FREE CHLORINE TEST KIT is available as DPD method and the kit gives very reliable results. The end point is very sharp and easily discernable by the user. Even a shop floor worker will be able to get desired results with our test kit.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE215
• Range: 0.2 - 4.0 PPM (MG/L)
• No of Tests: 200
• HSN: 90275090
• Packing: Plastic Case

Orthophosphate is a commonly used corrosion inhibitor that is added to finished drinking water. It works by forming a protective coat inside pipes in the distribution systems and in customer homes to prevent lead from leaching into drinking water. The other name is phosphoric acid and it is used to control alkalinity/acidity in foods and beverages. It is a vital parameter for boiler cooling and process water treatment. This AE301 - PHOSPHATE TEST KIT is again based on colour comparison in simple and easy steps.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life

Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand contact time ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL AE246 - CHLORINE TEST KIT chlorine test is available Iodometric method and this kit gives very reliable results. Even a shop floor worker will be able to get desired results with our test kit.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE246
• Range: 10 - 200 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

When water passes through or over deposits such as limestone the levels of Calcium and magnesium ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE521 - TOTAL HARDNESS TEST KIT is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE521
• Range: 5 - 100 & 25 - 500 PPM (MG/L)
• No of Tests: 500
• HSN: 90275090
• Packing: Plastic Case

When water passes through or over deposits such as limestone the levels of Calcium and magnesium ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE531 - TOTAL HARDNESS TEST KIT is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE531
• Range: 1 - 20 & 5 - 100 PPM (MG/L)
• No of Tests: 500
• HSN: 90275090
• Packing: Plastic Case

Chemical Oxygen Demand (COD) is defined as the amount of a specific oxidant that reacts with the sample under controlled conditions. The quantities of oxidant consumed is expressed in terms of its oxygen equivalence. Because of Dichromate ions specific oxidant properties (CrO72-) unique chemical properties it gets reduced to the chromic ion (Cr3+) in COD test. COD is a defined test the extent of sample oxidation can be affected by digestion time reagent strength and sample COD concentration. COD is often used on a measurement of pollutants in waste water and natural water. To determine COD two methods are useful the open reflux method is suitable for a wide range of waste water and large sample size is preferred. Another is the closed reflux method is suitable for smaller quantities. It requires homogenisation of sample. Accurate measurement of sample values as well as reagent volumes and concentration are critical. Most type of organic matter are oxidised by a boiling mixture of Chromic and Sulphuric acid. A sample is heated in strongly acid solution with known excess of potassium dichromate. After digestion the remaining unreduced dichromate is titrated with Ferrous Ammonium Sulphate to determine the amount of dichromate consumed and the oxidized matter is calculated in terms of oxygen equivalent. Closed result method is used for AQUASOL AE407 - COD TEST KIT. This kit is applicable to COD values between 40 to 400 mg/l. Obtained high values by dilution.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE407
• Range: 40 - 400 PPM (MG/L)
• No of Tests: 100
• HSN: 90275090
• Packing: Plastic Case

Sulphite is not usually present in surface waters. If sulphite is discharged in effluents or from domestic wastewaters it readily oxidizes to sulphate. Sodium sulphite the most common form of sulphite is an excellent reducing agent and is commonly used as an oxygen scavenger to control corrosion. Sulphite concentrations in boiler and process waters must be monitored regularly to protect the systems. Our AE206 - SULPHITE TEST KIT works when sulphite in salt form has been added to waters. It is a titration method easy to use and easy to read.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE206
• Range: 5 - 100 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Fluoride occurs naturally in all types of water. Typically surface waters and sea waters have low concentration of fluoride while groundwater may contain high levels of fluoride as it may be exposed to many inorganic fluoride-containing minerals. Fluoride salts are also frequently encountered in many industrial applications. Fluoride is important in drinking water as excessive fluoride cause mottling. A permissible limit has been laid down for fluoride therefore analysis of fluoride is mandatory in drinking water. Our AE210 - FLUORIDE TEST KIT is one of its kinds and works on the titrimetric principle.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE210
• Range: 0.1 - 2.0 & 1 - 20 PPM (MG/L)
• No of Tests: 500
• HSN: 90275090
• Packing: Plastic Case

Silica is an oxide of silicon and is present in almost all minerals. It is found in surface and well water. Silica is a problem for high-pressure boilers as it exhibits enough volatility that high-pressure boilers will have silica carry over to the vapor partition. When the steam pressure is reduced in turbines silica will precipitate on the blades as a glassy deposit which reduces efficiency. Measuring silica in water is useful to monitor demineralized for boiler water treatment. Our AQUASOL AE302 - SILICA TEST KIT kits are based on color comparison and are very simple and convenient to use.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Chloride ions are one of the major inorganic anions in water and wastewater. Although high concentrations of chloride in water are not known to be toxic to humans they may corrode metal pipes. It is essential to monitor chloride concentration in boiler systems to prevent damage of metal parts. In high levels chloride can corrode stainless steel and be toxic to plant life. Therefore chloride is one of the very important parameters which is frequently tested and our AQUASOL AE203 - CHLORIDE TEST KIT makes testing easy simple at the same time accurate.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE203
• Range: 10 - 200 & 50 - 1000 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand contact time ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL AE246L - CHLORINE TEST KIT chlorine test is available Iodometric method and this kit gives very reliable results. Even a shop floor worker will be able to get desired results with our test kit.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE246L
• Range: 1 - 20 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Calcium hardness is caused by the presence of calcium ions in the water. Calcium salts can be readily precipitated from water and high levels of calcium hardness tend to promote scale formation in the water system. Calcium hardness is an important control test in industrial water systems such as boilers and steam raising plants. Our AQUASOL AE212 - CALCIUM HARDNESS TEST KIT tests high levels of calcium in water.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE212
• Range: 25 - 500 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand contact time ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL AE225 - FREE CHLORINE TEST KIT is available as DPD Colorometric method and the kit gives very reliable results. The end point is very sharp and easily discernable by the user. Even a shop floor worker will be able to get desired results with our test kit.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE225
• Range: 0 - 5.0 PPM (MG/L)
• No of Tests: 200
• HSN: 90275090
• Packing: Plastic Case

Calcium hardness is caused by the presence of calcium ions in the water. Calcium salts can be readily precipitated from water and high levels of calcium hardness tend to promote scale formation in the water system. Calcium hardness is an important control test in industrial water systems such as boilers and steam raising plants. Our AQUASOL AE202 - CALCIUM HARDNESS TEST KIT tests even low levels of calcium in water.

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE202
• Range: 5 - 100 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

The alkalinity of water is capacity of water to neutralise acid to desired ph. It is mainly a sum of carbonate bicarbonate and hydroxide ions. Salts of weak acids like borate silicate and phosphate may also contribute to alkalinity. Alkalinity is important in the treatment of potable water waste water boiler and cooling water. Our AQUASOL AE214 - ALKALINITY TEST KIT is very easy to use test to gives reliable results.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE214
• Range: 5 - 100 & 25 - 500 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

The acidity of water is the capacity of water to neutralize base to desired ph. Acidity is caused by weak organic acids and strong mineral acids. It indicates corrosion of water. Our AE264 - ACIDITY TEST KIT water test is a titration test and is extremely easy and convenient and gives accurate results.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE264
• Range: 10 - 200 & 100 - 2000 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

When water passes through or over deposits such as limestone the levels of Calcium and magnesium ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE501 - TOTAL HARDNESS TEST KIT is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE501
• Range: 2 - 40 & 5 - 100 PPM (MG/L)
• No of Tests: 500
• HSN: 90275090
• Packing: Plastic Case

Aluminum can enter a water from natural deposits or because of discharges from industrial operations. Its contamination in water is a known neurotoxin with possible links to dementia and Alzheimer?s disease. Aluminum also builds up on water pipes and water meters and service lines and resulting in malfunctions and can lead to breakdowns. Also it is used in some water systems to reduce microorganisms and but it is supposed to be removed from the water before it goes to consumers. Our AE451 - ALUMINIUM TEST KIT is based on color comparison and results obtained are easily discernable.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE451
• Range: 0.0 - 1.5 PPM (MG/L)
• No of Tests: 100
• HSN: 90275090
• Packing: Plastic Case

Amines are used as neutralizing agents for condensation water in boiler treatment. This helps to control corrosion.Our AQUASOL AE402 - AMINE TEST KIT is very easy to use test to gives reliable results in terms of cyclohexamine

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE402
• Range: 5 - 100 & 50 - 1000 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Amines are used as neutralizing agents for condensation water in boiler treatment. This helps to control corrosion.Our AQUASOL AE412 - AMINE TEST KIT is very easy to use test to gives reliable results in terms of cyclohexamine

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE412
• Range: 1 - 20 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Ammonia is present in variable concentrations in many surface and groundwater supplies. It is rapidly oxidized by certain bacteria in natural water systems to nitrite and nitrate a process that requires the presence of dissolved oxygen. Ammonia being a source of nitrogen is also a nutrient for algae and other forms of plant life and thus contributes to overloading of natural systems and cause pollution. Ammonia is important to be tested in fisheries. Our AE307 - AMMONIA TEST KIT is based on color comparison and results obtained are easily discernable.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE307
• Range: 0.5 - 8.0 PPM (MG/L)
• No of Tests: 250
• HSN: 90275090
• Packing: Plastic Case

Ammonia is present in variable concentrations in many surface and groundwater supplies. It is rapidly oxidized by certain bacteria in natural water systems to nitrite and nitrate a process that requires the presence of dissolved oxygen. Ammonia being a source of nitrogen is also a nutrient for algae and other forms of plant life and thus contributes to overloading of natural systems and cause pollution. Ammonia is important to be tested in fisheries. Our AE337 - AMMONIA TEST KIT is based on color comparison and results obtained are easily discernable.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE337
• Range: 0.25 - 8.0 PPM (MG/L)
• No of Tests: 250
• HSN: 90275090
• Packing: Plastic Case

Bromine substances are disinfectants and can be used as an alternative for chlorine. In swimming pools and bromine is used against the formation and growth of algae and bacteria and odors in swimming water.Our AQUASOL AE404 bromine test is based on dpd method and results obtained are easily discernable.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE404
• Range: 0.1 - 2.0 PPM (MG/L)
• No of Tests: 200
• HSN: 90275090
• Packing: Plastic Case

Carbon dioxide can react with water to form carbonic acid (h2co3). Carbonic acid will cause corrosion in steam and return lines. Carbon dioxide can originate from condenser air leakage or bicarbonate (hco3) alkalinity in the feed water.Our AQUASOL AE403 test for carbon dioxide is a titrimetric kit packaged with standardized reagents ready to use convenient and accurate.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE403
• Range: 2 - 40 & 10 - 200 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Chlorine dioxide is a broad-spectrum micro biocide effective over a wide ph range. Chlorine dioxide is effectively used in the control of microbiological growths in industrial cooling waters under conditions unfavorable to chlorine. Our AE405 - CHLORINE DIOXIDE TEST KIT is a titrimetric one generally used by cooling tower maintenance personnel to monitor residuals of the oxidising microbiocide.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE405
• Range: 0.2 - 4.0 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Chlorine dioxide is a broad-spectrum micro biocide effective over a wide ph range. Chlorine dioxide is effectively used in the control of microbiological growths in industrial cooling waters under conditions unfavorable to chlorine. Our AE405 - CHLORINE DIOXIDE TEST KIT is a colour comparator one generally used by cooling tower maintenance personnel to monitor residuals of the oxidising microbiocide.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE415
• Range: 0.1 - 5.0 PPM (MG/L)
• No of Tests: 500
• HSN: 90275090
• Packing: Plastic Case

Copper is a metal that exists in the environment as a mineral in rocks and soil. It is commonly found at low levels in natural water bodies. Consumption of high levels of copper can cause nausea vomiting diarrhoea gastric complaints and headaches. Copper salts are used to control algae.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE310
• Range: 0.25 - 5.0 PPM (MG/L)
• No of Tests: 250
• HSN: 90275090
• Packing: Plastic Case

DEHA is used in boiler water treatment as an oxygen scavenger for many high or medium pressure boilers. It has lower toxicity and other beneficial chemical properties enables complete boiler system protection. Our DEHA Test Kit is used to ensure the optimum dosage of DEHA is present in the Boiler water to protect from Corrosion

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE453
• Range: 0.0 - 1.5 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Hydrazine is used as an oxygen scavenger for high-pressure boilers in power plants and other industries to reduce the corrosion of metal pipes and fittings. Our AE304 - HYDRAZINE TEST KIT is regularly used for high-pressure boiler monitoring the results are easily discernable and can be used by shop floor personnel.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

The corrosiveness of process water due to hydrogen peroxide depends on the amount of dissolved oxygen that is produced. Oxygen corrodes iron-containing metals. Hydrogen peroxide is used as a disinfectant. H2O2 is used to disinfect drinking water. It is also used to combat excessive microbial growth in water systems and cooling towers. AQUASOL AEHP - HYDROGEN PEROXIDE TEST KIT helps to estimate the concentration of H2O2 in water.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Hydrogen sulfide occurs naturally in sulfur springs, swamps and salt marshes, and is often associated with the decomposition of organic material. H2S has a characteristic rotten egg smell which can be detected at very low levels before it cause health effects. Our AE452 - H2S TEST KIT (Hydrogen Sulphide) is a cost effective and convinent method for periodic monitoring H2S in water.. The end point is very sharp and easily discernable by the user.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Hydrogen sulfide occurs naturally in sulfur springs, swamps and salt marshes, and is often associated with the decomposition of organic material. H2S has a characteristic rotten egg smell which can be detected at very low levels before it cause health effects. Our AE452 - H2S TEST KIT (Hydrogen Sulphide) is a cost effective and convinent method for periodic monitoring H2S in water.. The end point is very sharp and easily discernable by the user.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

pH is the standard measure of how acidic or alkaline a solution is. It is a measure of the hydrogen ion concentration in solution. Ph is important because chemical processes take place when water has a certain ph. A ph indicator giving different colors at different ph is a simple and reliable method to read ph for routine monitoring. Our AQUASOL AE306 - PH TEST KIT comprises of a universal indicator giving clear colours which match the colour chart perfectly. An extremely easy to use product it finds usage in almost all processes.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

pH is the measure of the hydrogen ion concentration in water. It denotes if the water is acidic or alkaline. When pH is 7 it is said to be neutral. Natural water range between pH 5.0 and pH 10.0 while sea water is near pH 8.3. Monitoring of pH becomes an important exercise for the growth and well being of fresh water species this is especially true for a closed water body viz. nbreeding pond pans or aquariums. Fresh water species thrive over a large pH range viz.6.0 9.5.The growth retards below 6.0 and below 4.0 most species are killed. Our AQUASOL AE316 - PH TEST KIT comprises of a universal indicator giving clear colours which match the colour chart perfectly. An extremely easy to use product it finds usage in almost all processes.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Orthophosphate is a commonly used corrosion inhibitor that is added to finished drinking water. It works by forming a protective coat inside pipes in the distribution systems and in customer homes to prevent lead from leaching into drinking water. The other name is phosphoric acid and it is used to control alkalinity/acidity in foods and beverages. It is a vital parameter for boiler cooling and process water treatment. This AE311 - PHOSPHATE TEST KIT is again based on colour comparison in simple and easy steps.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Turbidity is a principal physical characteristic of water. It is caused by suspended matter or impurities that interfere with the clarity of the water. These include clay silt finely divided inorganic and organic matter soluble coloured organic compounds and plankton and other microscopic organisms. Turbidity is the measure of relative clarity of a liquid. Clarity is required for drinking water and in manufacturing uses. This AQUASOL AE300 - TURBIDITY TEST KIT is simple and adequate. It has been designed for onsite use. It suffices its purpose and helps regular monitoring.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Zinc is introduced into water naturally by the erosion of minerals from rocks and soil most zinc is introduced into water by artificial pathways such as by-products of steel production coal-fired power stations or from the burning of waste materials. Zinc is also used in some fertilizers that may leach into groundwater. Zinc is used as a corrosion inhibitor for Cooling water. The AE305 - ZINC TEST KIT is easy to use and the results achieved are fairly accurate.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

The alkalinity of water is capacity of water to neutralise acid to desired ph. It is mainly a sum of carbonate bicarbonate and hydroxide ions. Salts of weak acids like borate silicate and phosphate may also contribute to alkalinity. Alkalinity is important in the treatment of potable water waste water boiler and cooling water. Our AQUASOL AE204 - ALKALINITY TEST KIT is very easy to use test to gives reliable results.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE204
• Range: 10 - 200 & 100 - 2000 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Chromate is produced in pickling and plating operations anodizing aluminium leather tanning manufacturing of paints dyes and explosives. Chromate is used to inhibit corrosion in open and closed system cooling towers. This AE208 - CHROMATE TEST KIT water test kit is generally used by paint and dye manufacturers and very rarely for monitoring cooling systems as with the advent of technology newer safer biocides are being used and chromate has almost left the scene.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE208
• Range: 5 - 100 & 25 - 500 PPM (MG/L)
• No of Tests: 200
• HSN: 90275090
• Packing: Plastic Case

Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand contact time ph and temperature of the water. Total Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL AE235 - TOTAL CHLORINE TEST KIT is available as DPD method and the kit gives very reliable results. The end point is very sharp and easily discernable by the user. Even a shop floor worker will be able to get desired results with our test kit.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE235
• Range: 0.1 - 2.0 PPM (MG/L)
• No of Tests: 200
• HSN: 90275090
• Packing: Plastic Case